Aqua Mix Stone Enhancer
Aqua Mix Stone Enhancer is an economical, PFAS-free penetrating sealer that darkens and highlights unsealed natural stone. It rejuvenates worn stone, improves stain resistance and leaves a no-sheen enhanced finish.
Finish
Enhanced colour / no sheen
Ships In
3–5 business days
Ask our team about pricing, availability and samples.
Aqua Mix Stone Enhancer is an economical penetrating sealer that enriches the colour and character of unsealed natural stone. The solvent-based formula rejuvenates worn or weathered surfaces while adding stain protection without creating a gloss or surface film.
Aqua Mix Stone Enhancer: key benefits
- Darkens and highlights natural stone
- Rejuvenates worn and weathered surfaces
- Excellent stain protection
- PFAS-free solvent-based formula
- No-sheen enhanced appearance
- Protection for up to three years
Suitable surfaces and applications
Unsealed marble, granite, slate, limestone, travertine and quartzite, plus compatible porous grout joints. Suitable for interior and exterior applications.
Product specifications
| Brand | Aqua Mix |
|---|---|
| Sealer type | Economical enhancing penetrating sealer |
| Formula | Solvent-based, PFAS-free |
| Finish | Enhanced colour / no sheen |
| Suitable use | Interior and exterior |
| Available sizes | 3.8L |
| VOC content | Maximum 84 g/L |
| Approximate coverage | Approximately 6–40 m²/L depending on stone and finish |
| Expected protection | Up to three years |
Preparation and application
The surface should be completely dry, clean and free from waxes, sealers or finishes. Allow new installations to dry for 48 hours. Test an inconspicuous area to confirm the permanent colour change.
Apply with a sponge, brush, paint pad or cotton towel. Avoid overlapping and runs, particularly on vertical work. Wipe all excess product completely dry within five minutes. Additional applications require at least 30 minutes drying time.
Drying and care
Allow 30 minutes between applications. The surface is ready for traffic after at least two hours, should remain dry for 12 hours and reaches full cure after 48 hours.
Important limitations
- Do not apply over an existing sealer, finish, ProBlock or grout release.
- The product is not completely removable; testing is essential.
- The sealer does not prevent surface wear or acid etching.
Always read the product label and current technical data before use. Coverage and drying times vary with porosity, temperature, humidity and application method. Test Aqua Mix Stone Enhancer in a small, inconspicuous area to confirm compatibility and the finished appearance.
Need help selecting a sealer for your project? Contact Peninsula Tiles & Stone or explore our trade range. For current manufacturer documentation, see the official Aqua Mix product page.
