Aqua Mix Enrich'N'Seal
Aqua Mix Enrich’N’Seal is a premium, no-sheen enhancing sealer that deepens the colour and character of unsealed natural stone. Its PFAS-free Polycure™ formula offers maximum stain protection for interior and exterior surfaces.
Finish
Enhanced colour / no sheen
Ships In
3–5 business days
Ask our team about pricing, availability and samples.
Aqua Mix Enrich'N'Seal is a premium 100% polymer-solid enhancing sealer made with Polycure™ technology. It penetrates unsealed stone to deepen colour, highlight natural character and provide maximum stain protection without leaving a surface sheen.
Aqua Mix Enrich'N'Seal: key benefits
- Enriches worn and weathered natural stone
- Maximum stain resistance
- PFAS-free Polycure™ technology
- No-sheen enhanced appearance
- Suitable as a pre-grouting sealer
- Protection for up to 15 years
Suitable surfaces and applications
Unsealed marble, granite, slate, limestone, travertine and quartzite, plus porous grout joints. Suitable for interior and exterior applications where a richer, darker stone appearance is desired.
Product specifications
| Brand | Aqua Mix |
|---|---|
| Sealer type | Premium enhancing penetrating sealer |
| Formula | 100% polymer-solid, PFAS-free, solvent-based |
| Finish | Enhanced colour / no sheen |
| Suitable use | Interior and exterior |
| Available sizes | 473ml, 946ml, 3.8L |
| VOC content | Maximum 210 g/L |
| Approximate coverage | Approximately 6–40 m²/L depending on stone and finish |
| Expected protection | Up to 15 years |
Preparation and application
The surface must be completely dry, clean and free from waxes, sealers or finishes. Allow new installations to dry for 48 hours and always test first, because enhancing sealers permanently change colour.
Apply with a sponge, brush, paint pad or cotton towel. Avoid overlaps and runs. Wipe and buff all unabsorbed product completely dry within five minutes. If another application is needed, wait at least 30 minutes.
Drying and care
Allow 30 minutes between applications. The surface is ready for traffic after at least two hours, must remain dry for 12 hours and reaches full cure after 48 hours.
Important limitations
- Do not use over ProBlock, grout release or another pre-sealer.
- The product is not completely removable; always test the final appearance.
- Remove every trace of surface residue within five minutes.
Always read the product label and current technical data before use. Coverage and drying times vary with porosity, temperature, humidity and application method. Test Aqua Mix Enrich'N'Seal in a small, inconspicuous area to confirm compatibility and the finished appearance.
Need help selecting a sealer for your project? Contact Peninsula Tiles & Stone or explore our trade range. For current manufacturer documentation, see the official Aqua Mix product page.
