Aqua Mix Floor Shine & Hardener
Aqua Mix Floor Shine & Hardener is a PFAS-free, water-based protective finish for sealed porous floors. It leaves a clear high sheen, resists surface abuse and requires no buffing in interior dry areas.
Finish
Clear high sheen
Ships In
3–5 business days
Ask our team about pricing, availability and samples.
Aqua Mix Floor Shine & Hardener is a clear, durable protective floor finish made for compatible sealed surfaces. It builds a high sheen, resists day-to-day surface abuse and requires no buffing, making it useful for interior porous floors that need a refreshed finish.
Aqua Mix Floor Shine & Hardener: key benefits
- Clear protective finish over sealed surfaces
- High-sheen appearance with no buffing required
- PFAS-free water-based formula
- Low odour and low VOC
- Allows moisture vapour transmission
- May be used for pre-grouting protection on compatible tiles
Suitable surfaces and applications
Sealed Saltillo, terracotta, adobe, quarry tile, slate and sandstone in internal dry areas. It may also provide pre-grouting protection on unglazed porcelain and crackle-glazed tiles when used as directed.
Product specifications
| Brand | Aqua Mix |
|---|---|
| Sealer type | Protective floor finish / hardener |
| Formula | Water-based, PFAS-free, low VOC |
| Finish | Clear high sheen |
| Suitable use | Interior dry areas |
| Available sizes | 946ml, 3.8L |
| VOC content | Maximum 8% |
| Approximate coverage | Varies with surface porosity and number of coats |
| Expected protection | Up to one year |
Preparation and application
The surface must be clean, dry, sealed and free from incompatible coatings. Do not apply over silicone, oil or wax-based finishes. Existing Aqua Mix penetrating sealers should cure for at least 24 hours unless their label specifies otherwise.
Pour a small amount onto the sealed floor and spread evenly with a sponge mop or paint-pad applicator. Avoid overlaps and puddles. Apply two or three coats for a high shine, allowing at least one hour between coats.
Drying and care
The surface is ready for traffic three hours after the final coat. Keep the area dry for 12 hours. Full cure is reached after 24 hours.
Important limitations
- Do not use over Stone Enhancer or Enrich’N’Seal.
- Not suitable for exterior areas, pools, showers, countertops or standing water.
- Do not use as a finishing product on glazed ceramic or porcelain.
Always read the product label and current technical data before use. Coverage and drying times vary with porosity, temperature, humidity and application method. Test Aqua Mix Floor Shine & Hardener in a small, inconspicuous area to confirm compatibility and the finished appearance.
Need help selecting a sealer for your project? Contact Peninsula Tiles & Stone or explore our trade range. For current manufacturer documentation, see the official Aqua Mix product page.
