Aqua Mix Sealer's Choice Gold Rapid Cure
Aqua Mix Sealer’s Choice Gold Rapid Cure is the legacy premium penetrating sealer for natural stone, tile and grout. Aqua Mix now identifies this product as replaced by Sealer’s Choice Gold PFAS-Free.
Finish
Natural look / no sheen
Ships In
3–5 business days
Ask our team about pricing, availability and samples.
Aqua Mix Sealer's Choice Gold Rapid Cure is a premium water-based penetrating sealer designed for maximum stain protection on stone, tile and grout. Its rapid-cure formulation protects in less than four hours and maintains a natural, no-sheen appearance.
Product status: Aqua Mix states that this formula has been replaced by Sealer’s Choice Gold PFAS-Free. This listing is retained as a separate product reference for the complete range.
Aqua Mix Sealer's Choice Gold Rapid Cure: key benefits
- Maximum stain protection
- Rapid-cure protection in under four hours
- Suitable as a pre-grouting sealer
- Allows moisture vapour transmission
- Low-VOC water-based formula
- Protection for up to 15 years
Suitable surfaces and applications
Natural stone including sandstone, slate, quartz, marble, limestone, granite and bluestone/basalt; unglazed tile; polished and unpolished porcelain; clay pavers; concrete; terrazzo; brick; grout; masonry; encaustic tile and terracotta. Suitable for interior and exterior applications, including salt-water pool surrounds.
Product specifications
| Brand | Aqua Mix |
|---|---|
| Sealer type | Premium rapid-cure penetrating sealer |
| Formula | Water-based, low VOC |
| Finish | Natural look / no sheen |
| Suitable use | Interior and exterior |
| Available sizes | 473ml, 946ml, 3.8L, 18.9L |
| VOC content | Less than 75 g/L |
| Approximate coverage | Approximately 6–35 m²/L depending on surface and finish |
| Expected protection | Up to 15 years |
Preparation and application
Apply only to a clean, dry surface free of waxes, existing sealers and finishes. New work should dry for at least 24 hours. Use only between 10°C and 32°C and test a small area first.
Apply with a pump sprayer, paint pad, lambswool applicator, sponge or brush. Keep the surface wet for up to five minutes, then wipe completely dry with clean cotton, paper or microfibre towels. Porous surfaces may need another application.
Drying and care
Allow 30 minutes between applications. The surface is generally ready for traffic after two hours, should remain dry for at least 12 hours and reaches full cure after 24 hours.
Important limitations
- This is a superseded formula; confirm availability before specifying.
- Do not allow the sealer to dry on the surface.
- The sealer does not prevent surface wear or acid etching.
Always read the product label and current technical data before use. Coverage and drying times vary with porosity, temperature, humidity and application method. Test Aqua Mix Sealer's Choice Gold Rapid Cure in a small, inconspicuous area to confirm compatibility and the finished appearance.
Need help selecting a sealer for your project? Contact Peninsula Tiles & Stone or explore our trade range. For current manufacturer documentation, see the official Aqua Mix product page.
