Aqua Mix Sealer's Choice Gold PFAS-Free
Aqua Mix Sealer’s Choice Gold PFAS-Free is a premium, zero-VOC natural-look sealer for stone, tile and grout. It delivers strong stain protection, allows moisture vapour transmission and is suitable for interior and exterior use.
Finish
Natural look / no sheen
Ships In
3–5 business days
Ask our team about pricing, availability and samples.
Aqua Mix Sealer's Choice Gold PFAS-Free is a premium water-based penetrating sealer that protects porous stone, tile and grout while maintaining the surface’s natural appearance. The formula contains no PFAS or VOCs and includes Microban® cured-sealant protection against mould and mildew.
Aqua Mix Sealer's Choice Gold PFAS-Free: key benefits
- Premium water and oil-based stain protection
- PFAS-free, zero-VOC water-based formula
- Natural, no-sheen appearance
- Suitable as a pre-grouting sealer
- Allows moisture vapour transmission
- Protection for up to 10 years
Suitable surfaces and applications
Natural stone including sandstone, slate, quartz, marble, limestone, granite and bluestone/basalt; unglazed tile; polished and unpolished porcelain; clay pavers; concrete; terrazzo; brick; grout; masonry; encaustic tile and terracotta. Suitable for interior and exterior areas.
Product specifications
| Brand | Aqua Mix |
|---|---|
| Sealer type | Premium natural-look penetrating sealer |
| Formula | Water-based, PFAS-free, zero VOC |
| Finish | Natural look / no sheen |
| Suitable use | Interior and exterior |
| Available sizes | 473ml, 946ml, 3.8L, 18.9L |
| VOC content | Zero VOCs |
| Approximate coverage | Approximately 6–35 m²/L depending on surface and finish |
| Expected protection | Up to 10 years |
Preparation and application
The surface must be clean, dry and free from waxes, coatings, sealers and finishes. Allow new installations to dry for at least 24 hours and test in an inconspicuous area before starting.
Apply a liberal coat with a paint pad, sponge, brush or airless sprayer. Work the product into dense or honed surfaces with a white nylon pad. Allow up to five minutes of penetration, wipe with a damp microfibre towel and buff fully dry. Apply a second coat after at least 30 minutes.
Drying and care
Allow at least 30 minutes between coats. Light foot traffic may resume after the final dry buff as directed on the label; maximum stain protection is reached after a full 24-hour cure.
Important limitations
- Do not allow the product to dry as residue on the surface.
- Test natural stone first because composition and porosity vary.
- A sealer will not prevent surface wear or acid etching.
Always read the product label and current technical data before use. Coverage and drying times vary with porosity, temperature, humidity and application method. Test Aqua Mix Sealer's Choice Gold PFAS-Free in a small, inconspicuous area to confirm compatibility and the finished appearance.
Need help selecting a sealer for your project? Contact Peninsula Tiles & Stone or explore our trade range. For current manufacturer documentation, see the official Aqua Mix product page.
